What we offer
Grease Trap Cleaning & Restaurant Grease Interceptor Service in Tallahassee
Scheduled pumping and full cleaning for under-sink grease traps and outdoor grease interceptors, with the paperwork Tallahassee kitchens need for FOG compliance. What affects the cost is below; your free estimate comes after we know your trap size and access.
Routine grease trap cleaning
Scheduled removal of FOG and solids with plain-language notes on what we found. Ideal for restaurants that want predictable intervals.
Catch-up / overdue service
When the last visit was too long ago or you’ve inherited an unknown trap. We’ll scope access and load before promising a time window.
Under-sink interceptor service
Compact café and food-hall units — faster stops, still careful about baffles and refill readiness.
Outdoor / in-ground tanks
Higher-capacity interceptors with lid and traffic planning built into the visit.
Explore guides: pumping vs cleaning, how often to clean, and cost factors.
Commercial grease trap pumping and cleaning, start to finish
A grease trap works by slowing kitchen wastewater down long enough for fats, oils, and grease to float to the top and food solids to sink to the bottom, so cleaner water can leave through the outlet. As the grease cap thickens and the solids pile up, there is less room for that separation to happen. Eventually grease starts escaping with the water, drains slow down, odors build, and the trap stops doing its job. Regular pumping and cleaning restores the full working volume.
Our process
- Before we arrive: we confirm the trap type and size, where the lids or access covers are, your hours, and the best time to work without disrupting service.
- Measure: where practical, we check how thick the grease and solids layers are before pumping, which helps set the right interval.
- Pump out completely: grease cap, water, and settled solids all come out. A partial skim leaves solids that shorten the time to the next problem.
- Scrape and clean: walls, baffles, and inlet and outlet fittings are scraped so grease does not rebuild on old buildup.
- Inspect: we look at baffles or tees, lids, gaskets, and visible piping and note cracks, missing parts, or corrosion. Concrete interceptors can be damaged over time by the gases grease waste produces.
- Close up and document: lids are secured, the area is cleaned, and you sign and keep the service manifest.
Grease trap services for Tallahassee businesses
Restaurant grease trap cleaning
Full-service and quick-service restaurants, bars, and cafés. We fit visits around prep and service hours. See restaurant grease trap cleaning in Tallahassee.
Grease interceptor pumping
In-ground interceptors serving whole kitchens or shared buildings, with lid access and traffic planning built in. Read about outdoor grease interceptors.
Under-sink and hydromechanical traps
Compact units in cafés, coffee shops, food halls, and small kitchens that fill fast and need frequent service. See under-sink grease traps.
Institutional and campus-area kitchens
Cafeterias, hotel kitchens, church and event kitchens, and other high-volume operations with predictable seasonal peaks around the academic calendar and legislative session.
Food trucks and commissaries
Commissary sinks and small traps used by mobile vendors. See food truck grease disposal.
Overdue and emergency service
Catch-up cleanings for traps with unknown history and urgent calls when a trap is backing up. See emergency grease trap backups.
Inspection preparation
A cleaning timed before an expected inspection, plus help organizing your manifests and log. See inspection prep.
New tenant or new owner baseline
Taking over a restaurant space? A baseline cleaning and inspection tells you what condition the trap is in before your first service.
What affects grease trap cleaning cost
We don’t publish a price list, because trap size, how full the unit is, disposal fees, and visit frequency all change the cost. Small under-sink traps, indoor interceptors and outdoor in-ground interceptors are very different jobs, and large units are often quoted by the gallon removed. Your free estimate comes after we know your trap size and access.
Final quote after inspection.
What changes the price
- Size of the unit: a 20-gallon under-sink trap and a 1,500-gallon interceptor are very different jobs.
- How full it is: a trap that is well past the 25 percent mark takes longer to pump and clean and may need extra scraping.
- Frequency: regular scheduled service usually costs less per visit than one-off calls.
- Access: lids under parked cars, in drive-throughs, or under heavy equipment add time.
- Timing: emergency and after-hours work usually costs more.
More detail is in our grease trap cleaning cost guide for Tallahassee.
Staying on the right side of Tallahassee FOG rules
Inside the City of Tallahassee, food service establishments fall under the City’s industrial pretreatment program. The 2020 Sewer Use Manual says grease interceptors must be provided when the Florida Building Code (Plumbing) requires them or the City decides they are needed, must be of a type and capacity the City approves, must be easy to reach for cleaning and inspection, and must be inspected, cleaned, and repaired regularly by the business at its own expense, with a log kept on file. The City may require grease interceptor hauler manifests as reports, and it sets a local limit of 150 mg/L for total oil and grease in a discharge.
Under Florida Statutes section 403.0741, every pump-out must be documented on a service manifest that records the trap’s condition, confirms it was cleaned and that no graywater was returned, and shows how much grease waste was removed and where it was disposed of. Inspectors are expected to check that a restaurant has a contract with a hauler and that removals are documented. Keep your manifests for at least a year, together with your own cleaning log.
Questions about your specific permit or schedule should go to the City’s Industrial Pretreatment Section. Our FOG compliance basics and permit guide explain the basics in plain language.
Kitchen habits that stretch the time between pump-outs
- Scrape plates and pans into the trash before they reach the dish pit.
- Collect fryer oil in a used-cooking-oil container, never down a drain. Used oil bins are separate from the grease trap.
- Use sink strainers and empty them often.
- Do not pour very hot water or enzyme products into the trap to “melt” grease; it only moves the grease downstream into the sewer line.
- Train new staff during peak seasons, such as the start of each semester, when turnover is highest.
For more, read pumping vs cleaning, grease trap size and capacity, and commercial kitchen grease traps.
Who we work with around the capital region
Most of our calls come from a handful of situations. A restaurant manager notices slow floor drains in the middle of a Friday rush. A new owner takes over a space near campus and finds no service records. A cafeteria director needs manifests organized before an inspection. A property manager for a shared building needs one interceptor serviced on a schedule that works for several tenants. A caterer or church kitchen wants a cleaning after a big event. Each of these needs the same full pump-out and inspection, but the timing and paperwork are different, and we plan around them.
Shared interceptors in multi-tenant buildings
Shopping centers and mixed-use buildings in Tallahassee sometimes route several kitchens into one large interceptor. When that happens, it is important to agree on who schedules service and who keeps the records. If one tenant changes its menu or hours, the shared interceptor fills faster for everyone. We can set a schedule with the property manager and provide manifests that each tenant can keep on file.
Seasons that matter in Tallahassee
Kitchen volume here follows the academic and political calendar. The start of fall and spring semesters, home football weekends, graduation weeks, and the legislative session all bring surges. Summer can be quieter near campus, but that is also when heat makes a neglected trap smell worst. A schedule with extra visits before predictable peaks, and a cleaning before any long closure, keeps most kitchens out of trouble.
What we need from you to quote
To give an accurate quote, we ask for the business name and address, the type of trap or interceptor and its size if it is marked on the lid or in your building plans, where the lids are, your hours, and the date of your last pump-out. If you do not know the size, a photo of the lids and the area around them is usually enough to plan the first visit. After the first service, we can recommend a regular interval and quote it as a recurring schedule.
Grease interceptor service questions
What is the difference between a grease trap and a grease interceptor?
People use the words loosely. A grease trap usually means a smaller unit, often under a sink or in the floor inside the kitchen. A grease interceptor usually means a larger tank, often in the ground outside, sized for the whole kitchen’s flow. Both separate grease from water; interceptors simply hold much more.
Do you return water to the trap after pumping?
No. Florida law does not allow a hauler to return grease waste or graywater to a grease trap or interceptor. We remove the contents and take them to a permitted disposal facility.
How long does a pump-out take?
Small under-sink traps usually take well under an hour. In-ground interceptors take longer depending on size, how full they are, and how easy the lids are to open.
Can you set up a recurring schedule?
Yes. Most commercial kitchens do best on a fixed schedule based on their trap size and grease load. We will suggest a starting interval and adjust it based on what we find at each visit.
Do you serve kitchens outside the city limits?
Yes. We serve unincorporated Leon County and nearby towns in Gadsden, Wakulla, Jefferson, Madison, and Taylor counties, plus Thomasville and Bainbridge in Georgia. Utility rules differ outside the City of Tallahassee, so tell us where you are.
Do you repair broken baffles or lids?
We inspect them on every visit and tell you what we find. Repairs or replacements are quoted separately and only done with your approval.
When you’re ready
Request a quote
Share your trap type and city — we’ll send a quote from our team.
Request a quoteOr call (850) 999-5795