Guide
How Often Should a Restaurant Grease Trap Be Cleaned in Tallahassee?
Grease trap cleaning frequency for Tallahassee FL commercial kitchens — volume, trap size, and FOG compliance basics.
There isn’t one magic number. Many commercial programs land between 30 and 90 days, but fryer-heavy Tallahassee restaurants may need tighter cycles while lighter cafés stretch further. Local utility FOG rules and your interceptor size matter more than a generic blog calendar.
Signals you’re overdue
- Slow prep or floor drains during rush
- Grease odors near the trap
- FOG layer near the top of the tank at inspection
- Past backups that cleared temporarily
Our team helps you set a realistic interval after we understand your menu and trap capacity — then you can put us on a recurring schedule if you want.
More reading: FAQ · Services · Request a quote
Start from the measurement, not the calendar
The most useful number in grease trap maintenance is not a number of days. It is the percentage of the trap's liquid depth taken up by floating grease and settled solids. A common benchmark used by sewer utilities and pumpers is to clean before those layers together reach about 25 percent. Your interval is simply how long it takes your kitchen to get there.
That is why two restaurants on the same street can have very different schedules. A small café with a large outdoor interceptor might go three months. A wing restaurant with a compact under-sink unit might need service every week or two.
Typical starting points
These ranges are starting points we use before we have measurements for your kitchen. They are not rules, and your utility or plumbing official can require something different.
| Setup | Typical starting interval |
|---|---|
| Small under-sink trap, busy fryer kitchen | Every 1 to 2 weeks |
| Small under-sink trap, café or bakery | Every 2 to 4 weeks |
| Mid-size indoor interceptor | Every 30 to 60 days |
| Outdoor in-ground interceptor, full-service restaurant | Every 30 to 90 days |
| Outdoor interceptor, light-use kitchen (church, small office cafeteria) | Every 90 days or by measurement |
After the first two or three visits, we adjust based on what we measured. If the layers were well under a quarter, the interval can stretch. If they were at or over, it should shorten.
What speeds up filling in Tallahassee kitchens
- Menu. Fried foods, rendered meats, sauces, and dairy all push more grease into the drain.
- Volume swings. Football weekends, graduation, and the legislative session can double the meals served for a stretch.
- Summer heat. North Florida summers are long and hot. Warm water in the trap separates grease less efficiently, and decomposition speeds up, which brings odors and acids that attack concrete.
- Dishwashers and hot water. Very hot water and detergents emulsify grease so it passes through the trap rather than floating.
- Garbage disposals. Food solids from disposals settle fast and fill the bottom of the trap.
- Staff turnover. New staff who have not been trained to scrape and wipe can change the load overnight.
- Menu or equipment changes. Adding a fryer, a second dish machine, or catering can make an old interval obsolete.
What the City expects
Inside the City of Tallahassee, food service establishments fall under the City's industrial pretreatment program. The City's 2020 Sewer Use Manual requires that grease interceptors be inspected, cleaned, and repaired regularly by the business at its own expense, with a log kept on file, and the City may require hauler manifests as reports. It does not set one cleaning frequency for every kitchen; it expects the interceptor to be maintained so it works. Outside the city limits, in unincorporated Leon County or neighboring counties, rules depend on the utility that serves you, and some kitchens are on septic systems with their own requirements. Confirm with your utility.
Signs your interval is too long
- Slow sinks or floor drains during service.
- Grease odors near the dish pit or the outdoor lids.
- Grease visible in the outlet compartment or downstream cleanout.
- Layers at or above 25 percent at each visit.
- Backups that clear temporarily and then return.
Our clogged grease trap signs guide covers these in more detail.
Signs your interval may be too short
- Layers well under 10 percent at several visits in a row.
- Stable menu and volume.
- Good kitchen habits already in place.
In that case, stretching the interval saves money without adding risk. We tell you when we see this.
Making the schedule stick
Put the service on a fixed recurring schedule rather than calling when there is a problem. Recurring service usually costs less per visit, keeps your log complete, and avoids the emergency calls that come with a forgotten trap. Before known busy periods, such as the first home game or the start of session, book a visit just ahead so the trap starts empty.
For recurring service and pricing, see our grease trap cleaning services in Tallahassee. We also serve kitchens in Woodville, Havana, and Monticello.
An example of adjusting the interval
Say a Midtown restaurant starts on a 45-day schedule for its outdoor interceptor. At the first visit, the grease cap and solids together measure about 30 percent of liquid depth, over the benchmark. The next visit is moved to 30 days, and the layers measure about 18 percent. After two more visits at 30 days with similar readings, the schedule stays there through football season, then is tested at 40 days during the quieter summer, when the layers come in around 20 percent. That is the whole method: measure, adjust, and measure again. It takes a few visits, but the result is an interval that fits your kitchen instead of a guess.
Summer in North Florida
Heat speeds up how fast grease and food solids break down. SepticTankHub’s 2026 guide says kitchens in Florida and Louisiana often need cleaning 20 to 30 percent more often in July and August than in January. If your trap is near the 25 percent mark at its spring visit, shorten the interval before summer rather than after the first odor complaint.
Grease trap interval questions
Is there a required cleaning frequency in Tallahassee?
The City's Sewer Use Manual requires regular inspection, cleaning, and repair with a log on file, rather than one fixed frequency for every kitchen. The right interval keeps the trap working, which is usually judged by how full the layers are.
What is the 25 percent rule?
A common benchmark is to clean before floating grease and settled solids together take up about a quarter of the trap's liquid depth. Beyond that, grease separation drops and grease can pass into the sewer.
Do under-sink traps need more frequent cleaning?
Usually yes. They hold far less than outdoor interceptors, so a busy kitchen can fill one in a week or two.
Can we stretch our interval to save money?
If measurements show the layers well below a quarter over several visits, yes. Better kitchen habits such as scraping and wiping pans also slow filling.
Schedule grease trap pumping in Tallahassee
When your kitchen is ready for service, see our restaurant grease trap cleaning and grease interceptor service in Tallahassee for what a visit includes, what affects the cost, and how manifests support City of Tallahassee FOG compliance.
Related guides
When you’re ready
Request a quote
Tell us your city, trap type if you know it, and what’s going on in the kitchen. We’ll follow up with a quote.
Request a quoteOr call (850) 999-5795