Interceptor guide
Grit Trap Pumping in Tallahassee: Sand and Oil Interceptors Explained
Grit traps catch sand, mud and oily solids from car washes, repair shops and wash bays. Here is what the rules say, how pumping works, and what owners report paying.
What a grit trap does
A grit trap is a settling tank on a drain line. Water from wash bays, shop floors and equipment pads flows in slowly, heavy solids such as sand, mud, road grit and metal fines sink to the bottom, and cleaner water leaves through the outlet. Many sites pair it with an oil separator, which holds back floating petroleum oil, or use a combined sand and oil interceptor.
The words get mixed up. People search for grit trap, sand trap, sand interceptor, wash bay pit and oil-water separator for what is often the same equipment. A grease trap is different: it serves kitchens and holds back food fats.
Who has them in Tallahassee
Federal employment data for 2024 counts 16 private car wash establishments and 156 automotive repair and maintenance businesses in Leon County (BLS QCEW 2024, Leon County). Not every repair shop has a floor drain to sewer, but those that do are the main group covered by the code below. Fleet wash bays, equipment yards and public works facilities add more.
| Leon County, 2024 (private, annual average) | Establishments |
|---|---|
| Car washes | 16 |
| Automotive repair and maintenance | 156 |
| Food service and drinking places, for comparison | 741 |
What the rules say
Florida Building Code, Plumbing
Section 1003.4 of the Florida Building Code, Plumbing, 8th ed. (2023), Chapter 10 requires oil separators at repair garages where floor or trench drains are provided, at car-washing facilities, at factories that produce oily or flammable liquid wastes, and in hydraulic elevator pits. Section 1003.5 covers sand interceptors: they must be designed and located with ready access for cleaning and have a water seal of at least 6 inches.
City of Tallahassee Sewer Use Manual
The City of Tallahassee Sewer Use Manual (adopted September 9, 2020) says grease, oil, sand and lint interceptors must be provided if Chapter 10 of the Florida plumbing code requires them, or if the City’s General Manager decides they are needed. Interceptors must be a type and capacity the City approves, easy to reach for cleaning and inspection, and inspected, cleaned and repaired regularly at the user’s expense. A log of that work should be kept for at least three years. Businesses that send non-domestic wastewater to City sewer fall under the City of Tallahassee Wastewater Services, Pretreatment Program, which says businesses are routinely inspected and lists automotive repair and body shops and commercial vehicle wash facilities among the activities it covers.
Outside City sewer, in parts of Leon, Wakulla and Gadsden counties, your sewer utility or permit sets the rules. Sites on septic should ask the county health department.
How grit trap pumping works
- Open every lid and check the air before leaning in.
- Measure the settled solids and any oil layer.
- Vacuum out the water, oil and sludge. Grit is heavy and packed, so it often needs to be broken up with water first.
- Check baffles, outlet pipes and the sampling point.
- Record the date, volume removed and disposal facility in your log.
Nobody should enter the pit. Entering a tank is a confined-space job with its own equipment and procedures.
How often
The City manual says “regularly, as needed”, not a fixed number of days. The real limit is how fast your site fills: a busy tunnel wash after a week of pollen, red clay and storm grime fills much faster than a quiet repair bay. Measure the solids at each pump-out and shorten the interval if the pit is close to full. If your pretreatment permit sets a frequency, that comes first.
What affects grit trap pumping cost
There is little published information on grit trap costs, and owners in a 2025 Car Wash Forum, “Pump out recommendation” (Jan–Apr 2025) thread described very different bills. What moves the cost:
- the volume pumped, since many haulers charge by the gallon;
- the number of bays and pits on the site;
- how often the trap is pumped;
- whether a septic company or a specialty industrial firm does the work;
- whether the sludge has to be tested before disposal.
The spread comes mostly from disposal. Grit sludge from wash bays can carry oil and metals, and where a disposal site wants it tested first, the testing and hauling cost more than the pumping.
Signs a grit trap needs attention
- Water ponding in bays or slow floor drains.
- An oily sheen at the outlet or sampling point.
- Odors near the lids.
- Sand or mud showing up downstream of the trap.
- A pretreatment inspector’s note about solids or oil.
Is this something we do?
Our regular work is grease traps and interceptors for kitchens. If you have a grit trap, sand interceptor or oil separator, send us the business type, trap size, where the lids are and your last service record, and we will tell you plainly whether we can take the job.
Grit trap questions
Is a grit trap the same as a grease trap?
No. A grease trap holds kitchen wastewater long enough for fats to float. A grit trap or sand interceptor lets heavy solids such as sand, mud and metal fines sink, and an oil separator holds back petroleum oil. They are cleaned differently and the waste goes to different places.
Does Florida code require a car wash to have an interceptor?
Florida’s plumbing code (Section 1003.4) requires separators at car-washing facilities and at repair garages with floor or trench drains. Section 1003.5 says sand interceptors must have ready access for cleaning and a water seal of at least 6 inches. Your plans examiner decides what your site needs.
How long must a Tallahassee business keep interceptor records?
The City of Tallahassee Sewer Use Manual says a log of interceptor inspection, cleaning and repair should be kept for at least three years. That is longer than the one-year rule for grease manifests under Florida law.
Can grit trap waste go to the same place as kitchen grease?
Usually not. Grit sludge and oily water are a different waste stream from kitchen grease, and they must go to a facility permitted to take them. Ask any hauler where your waste will go and get it in writing.
How often should a car wash grit pit be pumped?
There is no single number. The City’s manual says interceptors must be cleaned regularly, as needed. One four-bay self-serve owner on Car Wash Forum reported pumping every three months. Measure the solids and set your schedule from that.
Sources: Florida Building Code, Plumbing, 8th ed. (2023), Chapter 10; City of Tallahassee Sewer Use Manual; City of Tallahassee Wastewater Services, Pretreatment Program; BLS QCEW 2024, Leon County; Car Wash Forum, “Pump out recommendation” (Jan–Apr 2025).
Kitchen grease trap service
If your site also has a kitchen, see our restaurant grease trap cleaning and grease interceptor service in Tallahassee for what a visit includes, what affects the cost, and how manifests support City of Tallahassee FOG compliance.
Related guides
When you’re ready
Request a quote
Tell us the business type, trap size and where the lids are, and we’ll tell you whether we can take it.
Request a quoteOr call (850) 999-5795